WindoorERP Documentation 19.0

Track work order progress across cutting, milling, crimping, and glazing

1 min read Updated 2026-08-28 WindoorERP 19.0

What this does

Tracks the step-by-step routing operations for each fabricated window unit from initial extrusion cutting to final hardware fitting.

Before you start

  • Work centers and standard routing operations configured.

Steps

Work orders list view showing operation status, work center, and order numbers

Work order detail form with timer controls and component consumption lines

Important

Corner crimping operations require verification of two-part epoxy adhesive injection and alignment cleats before crimping to ensure structural corner rigidity.

  1. 01
    Open Production › Shop Floor › Work Orders to see all active floor tasks.
  2. 02
    Filter work orders by work center (e.g. Cutting, CNC Machining, Corner Crimping, Glazing, Final QC).
  3. 03
    Open any work order to view technical drawings, expected vs real duration, and consumed components.
  4. 04
    Click Start to begin timing an operation, Pause for breaks, or Done upon stage completion.

Common mistakes

  • Advancing work orders to assembly before completing water drainage slot milling on sill profiles.
  • Leaving work order timers running continuously over shift breaks.

Continue learning

Operate touchscreen Shop Floor Terminals for real-time station execution Provides a rugged, tablet-optimized touchscreen interface for machine operators… Scan barcodes for instant workpiece progression through assembly stages Enables rapid assembly line throughput by scanning piece serial barcodes… Record finished window and door frames and generate serial passports Maintains an indelible register of every manufactured window and door unit…

Was this article helpful?

Running a window or door factory?

Ask for a demo